GS74104ATP/J
SOJ, TSOP
Commercial TempIndustrial TempFeatures
• Fast access time: 8, 10, 12 ns
• CMOS low power operation: 120/95/85 mA at minimum cycle time
• Single 3.3 V power supply
• All inputs and outputs are TTL-compatible• Fully static operation
• Industrial Temperature Option: –40° to 85°C• Package line up
J: 400 mil, 32-pin SOJ package
GJ:RoHS-compliant 400 mil, 32-pin SOJ packageTP: 400 mil, 44-pin TSOP Type II package
GP:RoHS-compliant 400 mil, 44-pin TSOP Type II package
A4A3A2A1A0CEDQ1VDDVSSDQ2WEA19A18A17A16A15
1M x 4
4Mb Asynchronous SRAM
8, 10, 12 ns3.3 V VDD
Center VDD and VSS
SOJ 1M x 4-Pin Configuraton
12345678910111213141516
32313029282726252423222120191817
A5A6A7A8A9OEDQ4VSSVDDDQ3A10A11A12A13A14NC
32-pin400 mil SOJ
Description
The GS74104A is a high speed CMOS Static RAM organized as 1,048,576 words by 4 bits. Static design eliminates the need for external clocks or timing strobes. The GS operates on a single 3.3 V power supply and all inputs and outputs are TTL-compatible. The GS74104A is available in 400 mil SOJ and 400 mil TSOP Type-II packages.
TSOP-II 1M x 4-Pin Configuration
NCNCNCA4A3A2
12345678910111213141516171819202122
44434241403938373635
NCNCNCA5A6A7A8A9OEDQ4VSSVDDDQ3A10A11A12A13A14NCNCNCNC
Pin Descriptions
Symbol
A0–A19DQ1–DQ4
CEWEOEVDDVSSNC
Description
Address inputData input/outputChip enable inputWrite enable inputOutput enable input+3.3 V power supply
GroundNo connect
A1A0CEDQ1VDDVSSDQ2WEA19A18A17A16A15NCNCNC
44-pin400 mil TSOP II
343332313029282726252423
Rev: 1.06 6/20061/11© 2001, GSI Technology
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
元器件交易网www.cecb2b.com
GS74104ATP/J
Block Diagram
A0
AddressInputBuffer
RowDecoder
Memory Array
A19CEWEOE
Column Decoder
Control
I/O Buffer
DQ1DQ4
Truth Table
CE
HLLLNote:
X: “H” or “L”
OE
XLXH
WE
XHLH
DQ1 to DQ8
Not SelectedReadWriteHigh Z
VDD Current
ISB1, ISB2
IDD
Rev: 1.06 6/20062/11© 2001, GSI Technology
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
元器件交易网www.cecb2b.com
GS74104ATP/J
Absolute Maximum Ratings
Parameter
Supply VoltageInput VoltageOutput VoltageAllowable power dissipationStorage temperature
Symbol
VDDVINVOUTPDTSTG
Rating
–0.5 to +4.6–0.5 to VDD +0.5(≤ 4.6 V max.)–0.5 to VDD +0.5(≤ 4.6 V max.)
0.7–55 to 150
Unit
VVVW
o
C
Note:
Permanent device damage may occur if Absolute Maximum Ratings are exceeded. Functional operation shall be restricted to Recommended Operating Conditions. Exposure to higher than recommended voltages for extended periods of time could affect device reliability.
Recommended Operating Conditions
Parameter
Supply Voltage for -8/-10/-12
Input High VoltageInput Low VoltageAmbient Temperature, Commercial RangeAmbient Temperature,Industrial Range
Symbol
VDDVIHVILTAcTAI
Min
3.02.0–0.30–40
Typ
3.3————
Max
3.6VDD +0.30.87085
Unit
VVV
oCo
C
Notes:
1.Input overshoot voltage should be less than VDD +2 V and not exceed 20 ns. 2.Input undershoot voltage should be greater than –2 V and not exceed 20 ns.
Capacitance
Parameter
Input CapacitanceOutput Capacitance
Symbol
CINCOUT
Test Condition
VIN = 0 VVOUT = 0 V
Max
57
Unit
pFpF
Notes:
1.Tested at TA = 25°C, f = 1 MHz
2.These parameters are sampled and are not 100% tested.
Rev: 1.06 6/20063/11© 2001, GSI Technology
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
元器件交易网www.cecb2b.com
GS74104ATP/J
DC I/O Pin Characteristics
Parameter
Input Leakage CurrentOutput Leakage
CurrentOutput High VoltageOutput Low Voltage
Symbol
IILILOVOHVOL
Test Conditions
VIN = 0 to VDDOutput High ZVOUT = 0 to VDDIOH = –4mAILO = +4mA
Min
– 1 uA–1 uA2.4—
Max
1 uA1 uA—0.4 V
Power Supply Currents
Parameter
Symbol
Test ConditionsCE ≤ VILAll other inputs ≥ VIH or ≤ VILMin. cycle timeIOUT = 0 mACE ≥ VIH All other inputs≥ VIH or ≤VILMin. cycle timeCE ≥ VDD - 0.2VAll other inputs≥ VDD - 0.2V or ≤ 0.2V
0 to 70°C
8 ns
10 ns
12 ns
8 ns
–40 to 85°C10 ns
12 ns
OperatingSupplyCurrent
IDD120 mA95 mA85 mA130 mA105 mA95 mA
StandbyCurrent
ISB130 mA25 mA22 mA40 mA35 mA32 mA
StandbyCurrent
ISB210 mA20 mA
Rev: 1.06 6/20064/11© 2001, GSI Technology
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
元器件交易网www.cecb2b.com
GS74104ATP/J
AC Test Conditions
Parameter
Input high levelInput low levelInput rise timeInput fall timeInput reference levelOutput reference level
Output load
Conditions
VIH = 2.4 VVIL = 0.4 Vtr = 1 V/nstf = 1 V/ns1.4 V1.4 VFig. 1& 2
Output Load 1
DQ
50ΩVT = 1.4 V
30pF1
Output Load 2
3.3 V
DQ
5pF1
589Ω434Ω
Notes:
1.Include scope and jig capacitance.
2.Test conditions as specified with output loading as shown in Fig. 1
unless otherwise noted.
3.Output load 2 for tLZ, tHZ, tOLZ and tOHZ
AC CharacteristicsRead Cycle
ParameterRead cycle timeAddress access timeChip enable access time (CE)Output enable to output valid (OE)Output hold from address changeChip enable to output in low Z (CE)Output enable to output in low Z (OE)Chip disable to output in High Z (CE)Output disable to output in High Z (OE)
* These parameters are sampled and are not 100% tested.
SymboltRCtAAtACtOEtOHtLZ*tOLZ*tHZ*tOHZ*
-8Min8———330——
Max—883.5———43.5
Min10———330——
-10
Max—10104———54
Min12———330——
-12
Max—12125———65
Unitnsnsnsnsnsnsnsnsns
Rev: 1.06 6/20065/11© 2001, GSI Technology
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
元器件交易网www.cecb2b.com
GS74104ATP/J
Read Cycle 1: CE = OE = VIL, WE = VIH
tRC
Address
tAA
tOH
Data Out
Previous Data
Data valid
Read Cycle 2: WE = VIH
tRC
Address
tAA
CE
tAC
tLZ
OE
tOE
Data Out
tOLZ
High impedance
DATA VALID
tHZ
tOHZ
Rev: 1.06 6/20066/11© 2001, GSI Technology
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
元器件交易网www.cecb2b.com
GS74104ATP/J
Write Cycle
ParameterWrite cycle timeAddress valid to end of writeChip enable to end of write
Data set up timeData hold timeWrite pulse widthAddress set up timeWrite recovery time (WE)Write recovery time (CE)Output Low Z from end of writeWrite to output in High Z
SymboltWCtAWtCWtDWtDHtWPtAStWRtWR1tWLZ*tWHZ*
-8Min85.55.5405.50003—
Max——————————3.5
Min10775070003—
-10
Max——————————4
Min12886080003—
-12
Max——————————5
Unitnsnsnsnsnsnsnsnsnsnsns
* These parameters are sampled and are not 100% tested.
Write Cycle 1: WE control
tWC
Address
tAW
OE
tCW
CE
tAS
WE
tDW
Data In
tWHZ
Data Out
HIGH IMPEDANCE
DATA VALID
tWR
tWP
tDH
tWLZ
Rev: 1.06 6/20067/11© 2001, GSI Technology
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
元器件交易网www.cecb2b.com
GS74104ATP/J
Write Cycle 2: CE control
tWC
Address
tAW
OE
tAS
CE
tWP
WE
tDW
Data In
DATA VALID
tWR1
tCW
tDH
Data Out
HIGH IMPEDANCE
32-Pin SOJ, 400 mil
Dimension in inch
Symbol
D
Lc
EHEGEAA1A2BB1
e
A
Dimension in mmmin—0.662.670.330.610.1520.8310.04—10.939.002.08—0o
nom——2.800.430.710.2020.9310.161.2711.059.30———
max3.70—2.920.530.810.3021.0610.28—11.179.60—0.1010o
min—0.0260.1050.0130.0240.0060.8200.395—0.4300.3540.082—0o
nom——0.1100.0170.0280.0080.8240.4000.050.4350.366———
max0.146—0.1150.0210.0320.0120.8290.405—0.4400.378—0.00410o
1
cDE
AA2A1yBB1
eHE
Detail A
Q
GELyQ
Notes:
1. Dimension D& E do not include interlead flash.
2. Dimension B1 does not include dambar protrusion/intrusion.3. Controlling dimension: inches
Rev: 1.06 6/20068/11© 2001, GSI Technology
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
元器件交易网www.cecb2b.com
GS74104ATP/J
44-Pin, 400 mil TSOP-II
Dimension in inch
44
D
23cSymbolAA1A2
HEA
Dimension in mmmin—0.050.950.25—18.3110.06—11.560.40——0o
nom——1.000.350.1518.4110.160.8011.760.500.80——
max1.20—1.050.45—18.5110.26—11.960.60—0.105o
min—0.0020.0370.01—0.7210.396—0.4550.016——0o
nom——0.0390.0140.0060.7250.4000.0310.4630.0200.031——
max0.047—0.0410.018—0.7290.404—0.4710.024—0.0045o
EBcDEeHEL
1A2e
22B
AA1yL1LL1yQ
Q
Detail ANotes:
1.Dimension D& E do not include interlead flash.
2.Dimension B does not include dambar protrusion/intrusion.3.Controlling dimension: mm
Rev: 1.06 6/20069/11© 2001, GSI Technology
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
元器件交易网www.cecb2b.com
GS74104ATP/J
Ordering Information
Part Number*
GS74104ATP-8GS74104ATP-10GS74104ATP-12GS74104ATP-8IGS74104ATP-10IGS74104ATP-12IGS74104AGP-8GS74104AGP-10GS74104AGP-12GS74104AGP-8IGS74104AGP-10IGS74104AGP-12IGS74104AJ-8GS74104AJ-10GS74104AJ-12GS74104AJ-8IGS74104AJ-10IGS74104AJ-12IGS74104AGJ-8GS74104AGJ-10GS74104AGJ-12GS74104AGJ-8IGS74104AGJ-10IGS74104AGJ-12I
Package
400 mil TSOP-II400 mil TSOP-II400 mil TSOP-II400 mil TSOP-II400 mil TSOP-II400 mil TSOP-II
RoHS-compliant 400 mil TSOP-IIRoHS-compliant 400 mil TSOP-IIRoHS-compliant 400 mil TSOP-IIRoHS-compliant 400 mil TSOP-IIRoHS-compliant 400 mil TSOP-IIRoHS-compliant 400 mil TSOP-II
400 mil SOJ400 mil SOJ400 mil SOJ400 mil SOJ400 mil SOJ400 mil SOJ
RoHS-compliant 400 mil SOJRoHS-compliant 400 mil SOJRoHS-compliant 400 mil SOJRoHS-compliant 400 mil SOJRoHS-compliant 400 mil SOJRoHS-compliant 400 mil SOJ
Access Time
8 ns10 ns12 ns8 ns10 ns12 ns8 ns10 ns12 ns8 ns10 ns12 ns8 ns10 ns12 ns8 ns10 ns12 ns8 ns10 ns12 ns8 ns10 ns12 ns
Temp. Range
CommercialCommercialCommercialIndustrialIndustrialIndustrialCommercialCommercialCommercialIndustrialIndustrialIndustrialCommercialCommercialCommercialIndustrialIndustrialIndustrialCommercialCommercialCommercialIndustrialIndustrialIndustrial
Status
MPMPMPMPMPMPPQPQPQPQPQPQMPMPMPMPMPMPPQPQPQPQPQPQ
Notes:
1.Customers requiring delivery in Tape and Reel should add the character “T” to the end of the part number. For example: GS74104TP-8T.2.MP = Mass Production. PQ = Pre-Qualification.
Rev: 1.06 6/200610/11© 2001, GSI Technology
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
元器件交易网www.cecb2b.com
GS74104ATP/J
4Mb Asynchronous Datasheet Revision History
Rev. Code: Old;
New
74104A_r1
74104A_r1; 74104A_r1_0174104A_r1_01; 74104A_r1_0274104A_r1_02; 74104A_r1_0374104A_r1_03; 74104A_r1_0474104A_r1_04; 74104A_r1_0574104A_r1_05; 74104A_r1_06
Types of ChangesFormat or Content
Content/FormatContentContentContentContentContent/FormatContent6
Page #/Revisions/Reason
• Created new datasheet• Added 6 ns speed bin
• Updated all power numbers
• Updated Recommended Operating Currents on page 3• Added 7 ns bin to entire document• Add X package
• Removed 6 ns speed bin from entire document• Removed all references to “X” package• Removed 7 ns speed bin from entire document• Updated format
• Added RoHS-compliant information for TSOP-II package• Added RoHS-compliant 400 mil, 32-pin SOJ
Rev: 1.06 6/200611/11© 2001, GSI Technology
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
因篇幅问题不能全部显示,请点此查看更多更全内容