序号 标准编号 1. GB 10854-1989 2. GB/T 13148-1991 3. GB/T 13814-1992 4. GB/T 14283-1993 5. GB/T 15620-1995 标准名称 钢结构焊缝外形尺寸 备注 不锈钢复合钢板焊接技术条件 镍及镍合金焊条 点焊机器人通用技术条件 镍及镍合金焊丝 无焊连接 第4部分:不可接触无焊绝缘位移连接 一般要 6. GB/T 18290.4-2000 求、试验方法和使用导则 焊接工艺规程及评定的一般原则 7. GB/T 19866-2005 电弧焊焊接工艺规程 8. GB/T 19867.1-2005 钢、镍及镍合金的焊接工艺评定试验 9. GB/T 19869.1-2005 气体焊接设备 焊接、切割和类似作业用橡胶软管 10. GB/T 2550-2007 碳钢焊条 11. GB/T 5117-1995 低合金钢焊条 12. GB/T 5118-1995 焊接及相关工艺方法代号 13. GB/T 5185-2005 ASME BPVC Section Welding and Brazing Qualifications 14. IX-2007 Standard Practice for Steel castings,Welding,Qualifications of Procedures and 15. ASTMA488A488M-2007 Personnel Specification for Nickel and Nickel-Alloy Welding 16. AWS A5.11 A5.11M-2005 Electrodes for Shielded Metal Arc Welding Specification for Carbon Steel Electrodes for Flux Cored 17. AWS A5.20 A5.20M-2005 Arc Welding Specification for Stainless Steel Electrodes for Shielded 18. AWS A5.4 A5.4M-2006 Metal Arc Welding Specification for Low-Alloy Steel Electrodes for Shielded 19. AWS A5.5 A5.5M-2006 Metal Arc Welding Specification for Bare Stainless Steel Welding Electrodes 20. AWS A5.9 A5.9M-2006 and Rods Structural Welding Code-Reinforcing steel 21. AWS D1.4-D1.4M-2005 Sheet Metal Welding Code 22. AWS D9.1M D9.1-2006 Non-destructive testing-Qualification and certification of NDT personnel-General principles 23. BS EN 473-2000-E 无损检验—无损检验人员的资格鉴定和认证—一般规则 24. BS 4871-1-1982-E 25. BS EN 1011-1-1998-E Approval testing of welders working to approved welding procedures Welding-Recommendations for welding of metallic materials-Part1:General guidance for arc welding 焊接.焊接金属材料的建议.第1部分:电弧焊接通则 Welding-Recommendations for welding of metallic materials-Part3:Arc welding of stainless steels 焊接.焊接金属材料的建议.第3部分:不锈钢的电弧焊接 26. BS EN 1011-3-2000-E 27. BS EN 1011-4-2000-E Welding-Recommendations for welding of metallic materials-Part4:Arc welding of aluminium and aluminium alloys 焊接.焊接金属材料的建议.第4部分:铝和铝合金的电弧焊接 Welding-Recommendations for welding of metallic materials-Part5: welding of clad steel 焊接.焊接金属材料的建议.第5部分:复合钢焊接 Welding-Recommendations for welding of metallic materials-Part7:Electron beam welding 焊接.焊接金属材料的建议.第7部分:电子束焊接 冶金产品－检验文件型式(中文版) 28. BS EN 1011-5-2003-E 29. BS EN 1011-7-2004-E 30. BS EN 10204-1991 31. BS EN 10263-3-2001-E Steelrod,bars and wire for cold heading and cold extrusion-Part3:Technical delivery conditions for case hardening steels冷加工和冷挤压的钢棒、棒材和线材 第3部分:表面硬化钢交货的一般技术条件 Destructive tests on welds in metallic materials Macroscopic and microscopic examination of welds 金属材料焊接的破坏试验.焊接的宏观和微观检验 Protective clothing for firefighters —Laboratory test methods and performance requirements for wildland clothing 消防队用防护服装.实验室试验方法和野外服装的性能要求 Personal protection-Equipment for eye and face protection during welding and allied processes 个人防护.焊接和类似加工中眼睛和面部的防护设备 Specification for Calibration block No. 2 for ultrasonic examination of welds 焊缝超声检验用2号检验试块规范 焊工资格考试第1部分钢(中文版) Qualification test of welders-Fusion Part1:Steels焊工资格考试第1部分钢 32. BS EN 1321-1997-E 33. BS EN 15614-2007-E 34. BS EN 175-1997 35. BS EN 27963-1992 36. BS EN 287-1-2004 37. BS EN 287-1-2004-E 38. BS EN 287-2-1997 39. BS EN 473-2000 40. BS EN ISO 13920-1997-E welding 焊工资质测试－熔焊第2部分铝和铝合金(中文版) 无损检测—资格和无损检测人员认证—一般原则 Welding-General tolerances for welded constructions-Dimensions for lengths and angles-Shape and position 焊接.焊接结构的通用公差.长度和角度尺寸.形状和位置 Vickers hardness testing of resistance spot, projection and seam welds (low load and microhardness)电阻点焊、凸焊和滚焊的维氏硬度试验(低荷载和超微硬度) Specimen dimensions and procedure for cross tension testing resistance spot and embossed projection welds电阻点焊和浮凸焊接十字形抗拉试验的程序和样品尺寸 41. BS EN ISO 14271-2001-E 42. BS EN ISO 14272-2001-E 43. BS EN ISO 14273-2001-E 44. BS EN ISO 14555-2006-E Specimen dimensions and procedure for shear testing resistance spot, seam and embossed projection welds电阻点焊、缝焊和浮凸焊接剪切试验的程序和样品尺寸 Welding-Arc stud welding of metallic materials 焊接.金属材料的电弧螺栓 45. BS EN ISO 15609-3-2004-E Specification and qualification of welding procedures for metallic materials-Welding procedure specification-Part3:Electron beam welding金属焊接工艺的规范和验收 焊接工艺规范 第3部分：电子束焊 Specification and qualification of welding procedures for metallic materials-Welding procedure specification-Part4:Laser beam welding金属焊接工艺的规范和验收 焊接工艺规范 第4部分：激光束焊 Specification and qualification of welding procedures for metallic materials-Welding procedure specification-Part5:Resistance welding金属焊接工艺的规范和验收 焊接工艺规范 第5部分：电阻焊 46. BS EN ISO 15609-4-2004-E 47. BS EN ISO 15609-5-2004-E Specification and qualification of welding procedures for metallic materials-Welding procedure 48. BS EN ISO 15614-10-2005-E test-Part10:Hyperbaric dry welding金属材料焊接程序的规范和鉴定.焊接程序试验 第10部分：超基干焊 Specification and qualification of welding procedures for metallic materials-Welding procedure test-Part11:Electron 49. BS EN ISO 15614-11-2002-E and laser beam welding金属材料焊接程序的规范和鉴定.焊接程序试验 第11部分：电子和激光束焊 Specification and qualification of welding procedures for metallic materials-Welding procedure test-Part1:Arc and gas welding of steels and arc welding of nickel and nickel alloys 金属材料焊接程序的规范和鉴定.焊接程序试验 第1部分：钢的电弧焊和气焊及镍和镍合金的焊接 Specification and qualification of welding procedures for metallic materials-Welding procedure test-Part1:Arc welding of titanium,zirconium and their alloys金属材料焊接程序的规范和鉴定.焊接程序试验 第5部分：钛、锆及其合金的电弧焊 Specification and qualification of welding procedures for metallic materials-Welding procedure test-Part8:Welding of tubes to tube-plate joints金属材料焊接程序的规范和鉴定.焊接程序试验 第8部分管对管连接件 Welding Fusion-welded joints in steel nickel titanium and their alloys (beam welding excluded) Quality evels for imperfections Welding and allied processes-Classification of geometric imperfections in metallic materials-Part1:Fusion welding Welding and allied processes-Classification of geometric imperfections in metallic materials-Part1:Fusion welding 50. BS EN ISO 15614-1-2004-E 51. BS EN ISO 15614-5-2004-E 52. BS EN ISO 15614-8-2002-E 53. BS EN ISO 5817-2007-E 54. BS EN ISO 6520-1-1998-E 55. BS EN ISO 6520-1-2007-E 56. BS EN ISO 6520-2-2002-E Welding and allied processes-Classification of geometric imperfections in metallic materials-Part2: welding with pressure Qualification test of welders-Fusion welding-Part2:Aluminium and aluminium alloys 焊工资格考试熔焊 铝合金 Testing of filler metals by means of weld metal specimens用焊缝金属试样进行对焊条的检验 57. BS EN ISO 9606-2-2004-E 58. DIN 32525-4-1985-E 59. DIN EN 1011-1-1998-E 60. DIN EN 1011-1-2002 61. DIN EN 1011-1-2002-E Recommendations for welding of metallic materials-Part1:General guidance for arc welding焊接金属材料的建议 第一部分：电弧焊接的一般说明 焊接金属材料的建议 第一部分：电弧焊接的一般说明（包括修改） Recommendations for welding of metallic materials-Part1:General guidance for arc welding焊接金属材料的建议 第一部分：电弧焊接的一般说明 Recommendations for welding of metallic materials-Part3:Arc welding of stainless steels焊接金属材料的建议 第三部分：不锈钢电弧焊 焊接金属材料推荐 第4部分：铝及铝合金弧焊 Recommendations for welding of materials-Part4:Arc welding of aluminium and aluminium alloys焊接金属材料推荐 第4部分：铝及铝合金弧焊 焊缝的无损检验 用于金属材料的总则 62. DIN EN 1011-3-2001-E 63. DIN EN 1011-4-2000 64. DIN EN 1011-4-2000-E 65. DIN EN 12062-2002 66. DIN EN 14700-2005-E 67. DIN EN 1599-1997-E metallic Welding consumables for hard-facing表面硬化焊接消耗 品 Covered electrodes for manual metalarc welding of creep-resisting steels Classification焊接消耗材料.抗蠕变钢手工电弧焊用药皮电焊条 non-destructive testing of welds Ultrasonic testing of welded joints Acceptance levels焊缝的无损检验 焊接连接件的超声波检验 允许极限值 68. DIN EN 1712-2002-E 69. DIN EN 1714-2002 70. DIN EN 1714-2002-E 71. DIN EN 30042-1994 72. DIN EN 499-1995-E 73. DIN EN 970-1997-E Non-destructive testing of welds Ultrasonic testing of welded joints焊缝无损探伤检测焊接接头的超声波检测 铝及其可焊合金电弧焊接头质量缺陷等级导则 Covered electrodes for manual metalarc welding of 焊缝无损探伤检测焊接接头的超声波检测 non-alloy and fine grain steels Classification焊料.非合金钢和细粒钢的手动金属电弧焊接用涂剂焊条.分类 Non-destructive examination of fusion welds visualv examination焊接外观检验 Destructive tests on welds in metallic materials Cold cracking tests for weldments Arc welding processes 74. DIN EN ISO 17642-1-2004-E Part1:General金属材料的焊接的有损试验 焊件的冷裂试验 弧焊过程 第1部分通则 75. EN 10204-2004 76. EN 1320-1997-E 77. EN ISO 15607-2003-E 78. ISO 10042-2005-corrigendum 金属产品－检验文件的类型 Destructive tests on welds in metallic materials Fracture tests金属材料焊接的破坏试验.断裂试验 Specification and qualification of welding procedures for metallic materials—General rules 焊接工艺评定通用准则 technical corrigendum(ISO 10042-2005的正误表) 焊接 焊接结构的一般公差 长度和角度的尺寸 形状和位置 79. ISO 13920-1996 80. ISO 14175-1997-E 81. ISO 14270-2000 82. ISO 14731-2006-E Welding consumables-Shielding gases for arc welding and cutting焊接用料.电弧焊接和切割用保护气体 电阻点焊、缝焊和凸焊的机械撕裂试验用样品尺寸及程序 Welding coordination-Tasks and responsibilities焊接协作 任务及职责 Welding personnel-Approval testing of welding operators for fusion welding and of resistance weld setters for fully mechanized and automatic welding of metallic materials焊接人员.金属材料的完全机械化焊接和自动焊接的熔焊工和阻焊工的认可试验标准级别 Welding-Guidelines for a metallic materials grouping system焊接 金属材料分类体系指南 中文版金属焊接工艺的规范和验收 焊接工艺规范 第1部分：电弧焊 83. ISO 14732-1998-E 84. ISO 15608-2005-E 85. ISO 15609-1-2004 86. ISO 15609-2-2001-E Specification and qualification of welding procedures for metallic materials- Welding procedure specification-Part2:Gas welding金属焊接工艺的规范和验收 焊接工艺规范 第2部分：气焊 Specification and qualification of welding procedures for metallic materials-Qualification based on tested welding consumables金属材料焊接程序规范和合格鉴定.基于试验焊接消耗品的合格鉴定 Specification and qualification of welding procedures for metallic materials-Qualification based on previous welding experience金属材料焊接程序规范和合格鉴定.根据已有焊接经验进行合格鉴定 金属材料焊接程序的规范和鉴定.焊接程序试验 第12部分：点焊、缝焊及凸焊 87. ISO 15610-2003-E 88. ISO 15611-2003-E 89. ISO 15614-12-2004 90. ISO 15614-4-2005-E Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 4 Finishing welding of aluminium castings金属材料焊接程序的规范和鉴定.焊接程序试验.第4部分:铝铸件的精焊 中文版金属材料焊接程序的规范和鉴定.焊接程序试验 第8部分管对管板接头焊接 Welding consumables-Test methods-Part1:Test methods for 91. ISO 15614-8-2002 92. ISO 15792-1-2000-E all-weld metal test specimens in steel,nickel and nickel alloys焊接耗材 试验方法 第1部分：钢、镍及镍合金全焊金属试样的试验方法 Welding consumables-Test methods-Part2:Preparation of single-run and two-run technique test specimens in steel 焊接耗材 试验方法 第2部分：钢单道焊和双面焊技术试样的制备 Welding consumables-Test methods-Part3:Classification testing of positional capacity and root penetration of welding consumables in a fillet weld 焊接耗材 试验方法 第3部分：角焊中焊接消耗品的根角熔深和填位能力的分类试验 Non-destructive testing of welds-General rules for fusion welds in metallic materials焊缝的无损检验.金属材料熔焊的一般规则 Non-destructive testing of welds-Radiographic testing of fusion-welded joints焊缝的无损检验.熔焊接头的放射检验 焊接消耗品-焊丝电极、铝和铝合金焊接用焊丝和焊条-分类 93. ISO 15792-2-2000-E 94. ISO 15792-3-2000-E 95. ISO 17635-2003-E 96. ISO 17636-2003-E 97. ISO 18273-2004 98. ISO 2553-1992-E 99. ISO 3834-1-2005 100. ISO 3834-2-2005 101. ISO 3834-3-2005 102. ISO 3834-4-2005 103. ISO 3834-5-2005 104. ISO 4063-1998-E 105. ISO 4136-2001-E 106. ISO 5173-2000-E 107. ISO 9018-2003 108. ISO 9606-1-1994-E 109. ISO 9606-3-1999-E 110. ISO 9712-2005-E Welded,brazed and soldered joints-Symbolic representation on drawings焊接连接.钎焊连接和软钎焊连接.图纸上符号表示法 金属材料熔化焊的质量要求 第1部分：相应质量要求等级的选择准则 金属材料熔化焊的质量要求 第2部分：完整质量要求 金属材料熔化焊的质量要求 第3部分：一般质量要求 金属材料熔化焊的质量要求 第4部分：基本质量要求 金属材料熔化焊的质量要求 第5部分：确认符合ISO 3834-2、ISO 3834-3或ISO 3834-4质量要求所需的文件 Welding and allied processes-Nomenclature of processes and reference numbers焊接及有关工艺-工艺和参考值的命名 Destructive tests on welds in metallic materials-Transverse tensile test金属材料焊接的破坏试验.横向抗拉试验 Destructive tests on welds in metallic materials-Bend tests金属材料焊接的破坏性测试-弯曲测试 金属材料焊缝的破坏性试验-十字接头和搭接接头的拉伸试验 Approval testing of welders-Fusion welding-Part1:steels焊工的验收试验.熔焊.第1部分钢 Approval testing of welders-Fusion welding-Part3:Copper and copper alloys焊工的认可试验.熔焊.铜及铜合金 Non-destructive testing-Qualification and certification of personnel无损检测.人员的资格鉴定与认证 111. ISO TR 15608-2005-E 112. ISO TR 17671-1-2002-E Welding-Guidelines for a metallic materials grouping system 焊接 金属材料分类体系指南 Welding-Recommendations for welding of metallic materials-Part1:General guidance for arc welding焊接.金属材料焊接的推荐.第1部分:电弧焊接通用指南 Welding-Recommendations for welding of metallic materials-Part4:Arc welding of aluminium and aluminium alloys金属材料焊接的推荐.第4部分:铝和铝合金的电弧焊接 电阻焊电极和附件用材料 113. ISO TR 17671-4-2002-E 114. JB/T 4281-1999 115. JB/T 6657-1993 116. JIS B 8282-1993 117. JIS B 8285-2003 118. JIS Z 3211-2000-E 119. JIS Z 3313-1999 120. JIS Z 3316-1-2001 121. JIS Z 3316-2001 122. NF EN IS0 9606.4-1999-E 气缸用密封圈 尺寸系列和公差 压力容器焊接接头的力学性能试验 压力容器用焊接程序鉴定试验(日文) Covered electrodes for mild steel低碳钢用涂覆电焊条 焊接材料标准（日文） 低碳钢及低合金钢用钨极惰性气体保护电弧焊焊条及焊 丝（日文） 低碳钢及低合金钢用钨极惰性气体保护电弧焊焊条及焊 丝（日文） Approval testing of welders Fusion Welding Part4:Nickel and nickel alloys焊工的认可试验.熔焊.镍及镍合金
因篇幅问题不能全部显示，请点此查看更多更全内容